Intrinsically Safe VR Speed Sensors
Intrinsic safety has become an increasingly popular approach for handling sensing requirements in hazardous locations. These sensors are intrinsically safe versions of Motion Sensors Hermetically Sealed VR Sensors or Epoxy Encapsulated VR Sensors.
These sensors are certified intrinsically safe to:
- CSA (with NRTL/C) for
Ex ia IIC: Class I, Zone 0: Class I, Groups A, B, C, D; Class II, Groups E, F, G; Class III
Ex ia IIA: Class I, Zone 0: Class I, Group D; Class II, Groups E, F, G; Class III - ATEX (2014/34/EU) for Ex II 1 G, Ex ia IIC T4 and T2, and Ex ia IIA T4 and T2
- IECEx for Ex ia IIC T4 or T2; Ex ia IIA T4 or T2
EU DECLARATION OF CONFORMITY AND INSTALLATION CONSIDERATIONS
- Features & Specifications
- Standard Models
Type
Variable reluctance (VR) or inductive type
Warranty
Unconditional one (1) year warranty if used within specifications
Physical Features
- Body material: 300 series stainless steel (locknut included)
- Encapsulation: hermetically sealed, heli-arc welded construction or epoxy encapsulation
- Magnet that resists demagnetization
- Focusing tip (pole piece) which allows greater air gap with no signal loss
- IR leakage: 100 Mohms @ 100 VDC min.
- High signal output
- High Shock and Vibration resistance (MIL-STD-202G METHOD 214A, Test Condition H)
- Interconnection Options Two (2) pin gold plated glass sealed connector (mates with: MS3106-10SL-4S)
- Pigtail with wires or cable
- NPT threaded body with wire or cable pigtail for explosion proof environments
Entity Parameters
- Group IIC:
– Vmax/Ui = 30 VDC
– Imax/Ii = 300 mA
– Pi = 0.75 W
– Ci/Ci = 0 uF
– Li/Li = 0 mH
Approvals
- Intrinsic safety to CSA (with NRTL/C) for Class I, Groups A, B, C, D; Class II, Groups E, F, G; Class III
- LCIE to ATEX (2014/34/EU) for Ex II 1 G; Ex ia IIC or IIB T6 to T3 Ga
- IECEx for Ex ia IIC or IIB T6 to T3 Ga
Ambient Temperature
-50°C to 175°C
 |  |
Hazardous Location: Class I, Div. I, Group A,B,C,D; Class II, Div. I, Group E,F,G; Class III and coal dust (If equipped with NPT/pigtail lead combinations, below units are also suitable for Class I, Div. I, Group A,B,C,D; Class II, Div. I, Group E,F,G; and Class III)
| MODEL NUMBER | TYPE | MOUNTING THREAD (A) | THREAD LENGTH (B) | OVERALL LENGTH (C) | TIP (Length/Dia.) (D) | RESISTANCE (Ohms) | INDUCTANCE (Henry) | GAUSS STRENGTH | INTERCONNECTION | TEMPERATURE RANGE |
| PC45-46 | Value | 5/8×18 | 1.43 | 2.656 | .15/.187 | 150 | Li/Li=0mH | 1200 | MIL-C-5015 Connector | -50˚C to +120˚C |
| PC45-30 | Value | 5/8×18 | 1.43 | 2.656 | .20/.106 | 1200 | Li/Li=0mH | 1000 | MIL-C-5015 Connector | -50˚C to +120˚C |
| PC45-9 | Premium | 5/8×18 | .875 | 2.685 | .31/.100 | 1700 | Li/Li=0mH | 325 | MIL-C-5015 Connector | -50˚C to +175˚C |
| PC45-7 | Premium | 5/8×18 | .875 | 2.685 | .31/.100 | 1200 | Li/Li=0mH | 810 | MIL-C-5015 Connector | -50˚C to +175˚C |
| PC45-5 | Premium | 11/16×24 | .563 | 2.685 | .70/.125 | 1380 | Li/Li=0mH | 350 | MIL-C-5015 Connector | -50˚C to +175˚C |
| PC45-1 | Premium | 11/16×24 | .563 | 2.685 | .70/.125 | 1800 | Li/Li=0mH | 850 | MIL-C-5015 Connector | -50˚C to +175˚C |
| PC45-47 | Premium | 11/16×24 | 1.25 | 2.685 | Flush | 1380 | Li/Li=0mH | 350 | MIL-C-5015 Connector | -50˚C to +175˚C |
| PC45-48 | Premium | 11/16×24 | 1.25 | 2.685 | Flush | 1800 | Li/Li=0mH | 850 | MIL-C-5015 Connector | -50˚C to +175˚C |
NOTES:
Dimensions in inches
Specifications +/-10%
Mounting threads UNF-2A
