Active VR Speed Sensors - EMI Susceptibility Hardened
DME Series
Motion Sensors DME series of active variable reluctance (VR) speed sensors are similiar to our standard DM series amplified sensors. The DME series offers EMI (Electromagnetic Interference) susceptability hardening and improved performance in environments with greater external electrical noise and disruptions. The DME series is equivalent to the Honeywell 584xx series while also offering CE compliance and additional pulse output offerings.
Specification Comparison with Motion Sensors DM series:
| DME Series | DM Series | |
|---|---|---|
| Input Power | 5 – 30 VDC | 8 – 30 VDC |
| Reverse Polarity | Yes | Yes |
| Short Circuit Protection | No | Yes |
| Current Draw | 21mA @ 30VDC | 30mA @ 30VDC |
| Frequency Response | 10Hz – 10KHz | 10Hz – 10KHz |
| Air Gap Capability | .118″* | .140″* |
| CE Compliance | Yes | Yes |
*dependent upon target geometry and construction
- Features & Specifications
- Standard Models
Variable Reluctance (Magnetic) with EMI susceptability hardening
Physical Features
- Body material: 300 series stainless steel
- Encapsulation: epoxy potting
- High Shock and Vibration resistance: MIL-STD-202G METHOD 214A, Test Condition H
Input Power
5 to 30 VDC, 25 mA max. @ 30VDC
Reverse polarity protected
Pulse Output Options
Guaranteed power on state at Logic 0
- Supply Tracking
Logic 0:
0.35 VDC Max @ 15VDC
0.80 VDC Max @ 30 VDC
Logic 1:
(VS x RL)/(RL+2200) - Open Collector
Logic 0:
0.35 VDC Max @ 15VDC
0.80 VDC Max @ 30 VDC
Logic 1:
(VS x RL)/(RL+Y*)
*Y=value of external pullup resistor
- TTL/CMOS: fan-out of 5 TTL/CMOS loads
Logic 0:
0.35 VDC Max @ 15VDC
0.80 VDC Max @ 30 VDC
Logic 1:
5 VDC +/- 0.5 VDC
0-10 VDC square wave (requires 10- 30 VDC input power)
Logic 0:
0.35 VDC Max @ 15VDC
0.80 VDC Max @ 30 VDC
Logic 1:
10 VDC +/- 1.0 VDC
- Three (3) pin MIL-C-5015 type connector with gold plated pins; mates with MS3106-10SL-3S
- M12x1 threaded 5 pin connector
- Other connector types upon request
- Pigtail with wires or cables.
- NPT threaded body with wire or cable pigtail
Temperature Range
Operating: -40˚C to +125˚C
Storage: -65˚C to +125˚C
Pin/Pigtail Connections
- Pin A (Red): Input Power (+)
- Pin B (Black): Common (-)
- Pin C (White): Pulse Output (+)
Airgap
Up to 0.118″ dependent on target geometry and sensor construction
Approvals
CE compliant to EMC Directive 2004/108/EC for use in residential, commercial, light industrial and heavy industrial environments
Warranty
Unconditional one (1) year warranty if used within specifications
STANDARD MODELS
Variable Reluctance Active Speed Sensors
