| Type: |
| |
Magnetic (inductive or variable reluctance)
or RF (modulated carrier) |
| |
|
| Warranty: |
| |
Unconditional one (1) year warranty if used within specifications. |
| |
|
| Physical Features: |
| |
Body material: 300 series stainless steel
Encapsulation: epoxy potting or hermetically sealed, welded construction
High Shock and Vibration resistance - Impact: 100 G's (6 mS, 1/2 sine) min.;
Vibration: 20 G's at 2,000 Hz min |
| |
|
| Input Power: |
| |
8 to 30 VDC, 10 mA max. @ no load
Reverse polarity protected |
| |
|
| Pulse Output Options: |
| |
Open collector; maximum OFF current 30 VDC, maximum ON current 400mA
TTL/CMOS; fan-out of 5 TTL/CMOS loads
0-10 VDC square wave (requires 15-30 VDC input power) |
| |
|
|
| Interconnection Options: |
| |
Three (3) pin MIL-C-5015 type connector with gold plated pins;
mates with MS3106-10SL-3S; other connector types upon request.
Pigtail with wires or cables.
NPT threaded body with wire or cable pigtail for explosion proof environments. |
| |
|
| Temperature Range: |
| |
Operating: -40˚C to +85˚C
Storage: -65˚C to +125˚C
NOTE:
Units that operate up to +125˚C are also available |
| |
|
| Pin/Pigtail Connections: |
| |
Pin A (Red): Input Power (+)
Pin B (Black): Common (-)
Pin C (White): Pulse Output (+) |
| |
|
| Airgap: |
| |
Up to 0.140" dependent on target geometry and sensor construction. |
| |
|
| Approvals: |
| |
CE compliant to EMC Directive 89/336/EEC for use in residential, commercial,
light industrial and heavy industrial environments. |
|
Standard Models
Variable Reluctance Active Speed Sensors
| Model Number |
Mounting Thread (A) |
Thread Length (B) |
Overall Length (C) |
Tip
(Length/Dia.)
(D) |
Output
Pulse Range) |
| DM-010 |
5/8x18 |
.875 |
3.07 |
.031/.100 |
open collector |
| DM-002 |
5/8x18 |
.875 |
3.07 |
.031/.100 |
0-5 VDC |
| DM-011 |
5/8x18 |
.875 |
3.07 |
.031/.100 |
0-10 VDC |
| DM-013 |
11/16x24 |
.875 |
3.07 |
.075/.105 |
open collector |
| DM-001 |
11/16x24 |
.875 |
3.07 |
.075/.105 |
0-5 VDC |
| DM-012 |
11/16x24 |
.875 |
3.07 |
.075/.105 |
0-10 VDC |
RF Active Speed Sensors
| Model Number |
Mounting Thread (A) |
Thread Length (B) |
Overall Length (C) |
Tip
(Length/Dia.)
(D) |
Output
Pulse Range) |
| DR-014 |
5/8x18 |
.875 |
3.45 |
flush front |
open collector |
| DR-002 |
5/8x18 |
.875 |
3.45 |
flush front |
0-5 VDC |
| DR-013 |
5/8x18 |
.875 |
3.45 |
flush front |
0-10 VDC |
| DR-007 |
11/16x24 |
.875 |
3.45 |
flush front |
open collector |
| DR-001 |
11/16x24 |
.875 |
3.45 |
flush front |
0-5 VDC |
| DR-003 |
11/16x24 |
.875 |
3.45 |
flush front |
0-10 VDC |
Notes:
- Dimensions in inches
- Specifications +/- 10%
- Mounting threads UNF-2A
Custom Active Speed Sensors
In addition to the standard models shown above, active VR and RF speed sensors are available in custom lengths, diameters, configurations, and mounting threads. Custom operating specifications (output options, etc.) are available, as well as options such as pigtail leads or NPT threading. Additional sensor customization options
We provide custom sensors on a regular basis and are happy to help develop a solution for your application, or a replacement sensor for an existing application. Please contact our engineering department at eng@motionsensors.com or 252-331-2080 to discuss your application requirements. |
