Standard Features and Specifications
| Type: |
| |
Magnetic (Inductive or Variable Reluctance) |
| |
|
| Physical Features: |
| |
Body material: 300 series stainless steel
Encapsulation: epoxy potting or hermetically sealed, welded construction
High Shock and Vibration resistance - MIL-STD-202G METHOD 214A, Test Condition H |
| |
|
| Input Power: |
| |
13 to 30 VDC, 35 mA @24 VDC
(Class I, Zone 0, IIC models)
7.5 to 30 VDC, 10 mA @ < 10 VDC
(Class I, Zone 0, IIA models)
Reverse polarity protected |
| |
|
| Pulse Output Options: |
| |
TTL/CMOS; fan-out of 5 TTL/CMOS loads
Open collector; maximum OFF voltage 30 VDC, maximum ON current 0.40 A |
| |
|
| Entity Parameters: |
| |
Group IIA:
Vmax/Ui = 30 VDC; Imax/Ii = 190 mA
Ci/Ci = 0.0 uF; Li/Li = .50 mH
Group IIC:
Vmax/Ui = 30 VDC; Imax/Ii = 200 mA
Ci/Ci = 0.0 uF; Li/Li = .50 mH |
| |
| |
| Ambient Temperature: |
| |
CSA Certified: -20°C to 40°C
ATEX Certified: -40°C to 80°C |
| |
|
| Interconnection Options: |
| |
Three (3) pin
MIL-C-5015 type connector with gold plated pins;
mates with MS3106-10SL-3S; other connector types
upon request.
Pigtail with wires or cable
NPT threaded body with wire or cable pigtail for explosion proof environments |
| |
|
| Pin/Pigtail Connections: |
| |
Pin A (Red): Input Power (+)
Pin B (Black): Common (-)
Pin C (White): Pulse Output (+) |
| |
|
| Airgap: |
| |
Up to 0.140" dependent on target geometry and sensor construction |
| |
|
| Approvals: |
| |
Intrinsic Safety to CSA (with NRTL/C) and LCIE to ATEX (94/9/EC)
CE compliant to EMC Directive 2004/108/EC for use in residential, commercial, light industrial and heavy
industrial environments |
| |
|
| Warranty: |
| |
Unconditional one (1) year warranty if used within specifications |
|
Standard Models
Tables 1 & 2
Hazardous Location: Class I, Zone 0, IIC;
Class I, Div. I, Group A,B,C,D and Class II, Div. I,
Group G, Class III and coal dust (If equipped
with NPT/pigtail lead combinations, below units are also
suitable for Class II, Div. 1, Group E,F,G, Class
III)
Table 1 VR Intrinsically Safe Digi-Pulse Sensors
| Model Number |
Mounting Thread (A) |
Thread Length (B) |
Overall Length (C) |
Tip
(Length/Dia.)
(D) |
Output
(Pulse Range) |
| DMX-002-1 |
5/8x18 |
.875 |
4.5 |
.031/.100 |
open collector |
| DMX-002-2 |
5/8x18 |
.875 |
4.5 |
.031/.100 |
0-5 VDC |
| DMX-001-1 |
11/16x24 |
.875 |
4.5 |
.075/.105 |
open collector |
| DMX-001-2 |
11/16x24 |
.875 |
4.5 |
.075/.105 |
0-5 VDC |
Table 2 RF Intrinsically Safe Digi-Pulse Sensors
| Model Number |
Mounting Thread (A) |
Thread Length (B) |
Overall Length (C) |
Tip
(Length/Dia.)
(D) |
Output
(Pulse Range) |
| DRX-002-1 |
5/8x18 |
.875 |
4.7 |
flush front |
open collector |
| DRX-002-2 |
5/8x18 |
.875 |
4.7 |
flush front |
0-5 VDC |
| DRX-001-1 |
11/16x24 |
.875 |
4.7 |
flush front |
open collector |
| DRX-001-2 |
11/16x24 |
.875 |
4.7 |
flush front |
0-5 VDC |
Tables 3 & 4
Hazardous Location: Class I, Zone 0, IIA; Class I, Div. I, Group D
and Class II, Div. I, Group G, Class III and coal dust (If equipped with NPT/pigtail lead
combinations, below units are also suitable for Class
II, Div. 1, Group E,F,G, Class III)
Table 3 VR Intrinsically Safe Digi-Pulse Sensors
| Model Number |
Mounting Thread (A) |
Thread Length (B) |
Overall Length (C) |
Tip
(Length/Dia.)
(D) |
Output
(Pulse Range) |
| DMX-002-3 |
5/8x18 |
.875 |
4.5 |
.031/.100 |
open collector |
| DMX-002-4 |
5/8x18 |
.875 |
4.5 |
.031/.100 |
0-5 VDC |
| DMX-001-3 |
11/16x24 |
.875 |
4.5 |
.075/.105 |
open collector |
| DMX-001-4 |
11/16 x 24 |
.875 |
4.5 |
.075/.105 |
0-5 VDC |
Table 4 RF Intrinsically Safe Digi-Pulse Sensors
| Model Number |
Mounting Thread (A) |
Thread Length (B) |
Overall Length (C) |
Tip
(Length/Dia.)
(D) |
Output
(Pulse Range) |
| DRX-004-3 |
5/8x18 |
.875 |
4.7 |
flush front |
open collector |
| DRX-002-4 |
5/8x18 |
.875 |
4.7 |
flush front |
0-5 VDC |
| DRX-003-3 |
11/16x24 |
.875 |
4.7 |
flush front |
open collector |
| DRX-001-4 |
11/16x24 |
.875 |
4.7 |
flush front |
0-5 VDC |
Notes:
Dimensions in inches
Specifications +/- 10%
Mounting threads UNF-2A
Custom Intrinsically Safe Active Speed Sensors
In addition to the standard models shown above, intrinsically safe active VR and RF speed sensors are available in custom lengths, diameters, configurations, and mounting threads. Custom operating specifications (output options, etc.) are available, as well as options such as pigtail leads or NPT threading. Additional sensor customization options
We provide custom sensors on a regular basis and are happy to help develop a solution for your application, or a replacement sensor for an existing application. Please contact our engineering department at eng@motionsensors.com or 252-331-2080 to discuss your application requirements. |
